Lantronix EMG 7500, User Manual

Page: 210 / 482

10: Device Ports
EMG™ Edge Management Gateway User Guide 210
3. Click the Apply button to save the changes.
Console Port Commands
Go to Console Port Commands to view CLI commands which correspond to the web page entries
described above.
Parity Parity checking is a rudimentary method of detecting simple, single-bit errors.
From the drop-down list, select the parity. The default is none .
Flow Control A method of preventing buffer overflow and loss of data. The available methods
include none , xon/xoff ( software), and rts/cts (hardware). The default is none .
Timeout The number of minutes (1-30) after which an idle session on the console is
automatically logged out. Disabled by default.
Show Lines on
Connecting
If selected, when you connect to the console port with a terminal emulator, you will
see the last lines output to the console, for example, the EMG boot messages or
the last lines output during a CLI session on the console.
Group Access If undefined, any group can access the console port. If one or more groups are
specified (groups are delimited by the characters ' ' (space), ',' (comma), or ';'
(semicolon)), then any user who logs into the console port must be a member of
one of the specified groups, otherwise access will be denied. Users authenticated
via RADIUS may have a group (or groups) provided by the RADIUS server via the
Filter-Id attribute that overrides the group defined for a user on the EMG. A group
provided by a remote server must be either a single group or multiple groups
delimited by the characters ' ' (space), ',' (comma), ';' (semicolon), or '=' (equals) -
for example "group=group1,group2;" or "group1,group2,group3".