11
4.1.3 Configuration
4.1.3.2 General Page
Access Point Name:
In this field, you may enter any name. This will enable you to manage your 3-in-1 AP more
easily if you have multiple 3-in-1 APs on the network. Besides,
Access Point Name
can be used to prevent you
from forgetting an IP Address and fail to access the website. Try to type the nickname you like to identify the
website, then press the button of
Apply
. W henever you want to get back to the website again,
just type the name you login.
Wireless Mode:
The default wireless operating mode of the 3-in-1 AP is Access Point (AP) mode. To switch to
AP
or Station
mode, select the desired mode from the down-arrow menu. Click
Apply
. The board will reboot into the
desired mode.
•
AP Mode
: The system can be configured to work as a wireless network access point. Note that the
3-in-1AP acts only as a layer 2 bridge and does not act as a DHCP server. In other words, it does not
supply dynamic IP addresses and instead relies on the network to supply them. The implementation can
be shown as below:
