manualshive.com logo in svg

Lanpro LP-1518, User Manual, Page: 8 / 34

Share
Download
Lanpro LP-1518 User Manual Download Page 8

 

8

 

 

 

 

 

 

Note: 

A hub could connect with up to 8 Ethernet-devices. However, it would reduce the transmission rate if 

connected with too many units. (The more units to connect with will produce less transmission rate.) 

 

 

Note: 

If all of your clients do not support TCP/IP protocol, only the first client can connect to the wireless station 

adapter. 

 

 

3.3.4  Install a WDS 

 

The 3-in-1 AP can be configured as a WDS. Under this mode, you can extend the range of your network by adding 

additional 3-in-1 AP with WDS mode for each additional LAN Segment. To connect two or more than two APs with 

WDS mode please do the following: 

1.  Attach one end of the Ethernet Cable to AP1 and connect the other end of the Ethernet Cable to Client1. 

2.  Attach one end of the Ethernet Cable to AP2 and connect the other end of the Ethernet Cable to Client2. 

3.  Connect the power adapter to the power socket on both of AP1 and AP2. The power 

  and the 

Ethernet light 

  should light up. 

4.  When AP1 and AP2 are associated with each other and Wireless LAN traffic activity, you will see the 

wireless LAN status 

  lights up. 

 

 

Summary of Contents for LP-1518



































Reviews:

No comments