Lanpro LP-1518 User Manual Download Page 28

Page: 28 / 34

5 Wireless Connection to the Internet /Head-to-Head for

your Gaming Console

Would you like to wirelessly enjoy playing games? The 3-in-1 AP can be act as a wireless gaming adapter for you

to game online through the Internet or to play with your friend (Head to Head gaming) in the same house. Select

one of the following and follow the installation steps accordingly.

5.1 Internet Gaming

1. The gaming adapter must be configured for your wireless network on your PC before connecting it to your

gaming console.

2. Login to the Web User Interface and set your gaming adapter as Infrastructure mode, type your wireless

network SSID in the ESSID field and click Apply to make settings take effect.

3. Make sure that the connection between your gaming adapter and wireless router/access point is ok.

4. Connect one end of the Ethernet cable to the Wireless Gaming Adapter’s LAN port and then connect the

other end of the cable to the Ethernet port on your gaming console.

5. Power on all units and make sure the gaming adapter is working properly.

6. Once you have configured your gaming adapter, you need to configure your gaming console. For

configuration details, refer to the documentation for your gaming console.

7. Start to enjoy playing gaming online through the Internet.

5.2 Head To Head Gaming

First, you may need to have a pair of gaming adapters for your gaming consoles. Be sure that both gaming adapters must

be configured the same settings.

Summary of Contents for LP-1518



































Search results

Summary of Contents for LP-1518

Reviews:

Related manuals for LP-1518

Brands by name

Popular brands

Lanpro LP-1518, User Manual

Search results

Summary of Contents for LP-1518

Reviews:

Related manuals for LP-1518

Brands by name

Popular brands