36
Bios Settings
Chapter 4
Network Application Platforms
Exit Menu
Select the Exit tab from the setup screen to enter the Exit
BIOS Setup screen. You can display an Exit BIOS Setup
option by highlighting it using the <Arrow> keys. All Exit
BIOS Setup options are described in this section. The Exit
BIOS Setup screen is at right.
Saving Changes and Exit
When you have completed the system configuration
changes, select this option to leave Setup and reboot the
computer so the new system configuration parameters
can take effect. .
Discard Changes and exit
Select this option to discard changes and exit.USB drive
can boot the system even when there is no USB drivers
loaded on the system. Set this value to allow the system
to select the Emulation type for a USB drive.
Option
Description
Auto
Set this value to allow the system to automatically
detect a USB drive emulation type.
Floppy
Set this value to allow the system to select floppy
emulation type.
Hard Disk
Drive
Set this value to allow the system to select hard
disk drive emulation type.
Discard Changes and Exit Setup Now?
Select this option to quit Setup without making any
permanent changes to the system configuration. Select
this option and press <Enter>.
Load Optimal Defaults
It automatically loads a complete set of default settings to
all Setup options when you Select this option. The Optimal
settings are designed for maximum system performance,
but may not work best for all computer applications. In
particular, do not use the Optimal Setup options if your
computer is experiencing system configuration problems.
Select Load Optimal Defaults from the Exit menu and
press <Enter>.
