Lanier 5455, Operator'S Manual

Page: 104 / 184

Copy/Document Server Settings
5 - 20 User Tools
3 Input/Output
Menu Description
Batch (SADF) Auto Reset Time When you set one original at a time in the
Document Feeder, the Auto Feed Indicator
lights for a selected time after an original is
fed to show that the Document Feeder is
ready for another original. You can adjust
this time from 3 seconds to 99 seconds.
Default is 10 seconds.
ARDF Original Table Rise Time You can set the Document Feeder original
table rise time.
Default is When Original is Set .
Face-Up/Down Selection in
Platen Mode
When copying an original placed on the
Exposure Glass or one original loaded in the
Document Feeder, you can specify which
way up it is ejected.
Default is Face Up Exit .
Rotate Sort Auto Paper
Continue
You can specify whether to continue
copying when the paper of the required
orientation has run our during rotate
sorting.
If you select No:
When paper of the required orientation runs
out, the copier stops copying and prompts
your to load more paper.
If you select Yes:
Copying continues using copy paper of a
different direction. The copy job will finish
even if you have left the copier.
Default is No .
Auto Sort Mode You can specify whether Sort mode is
selected when the copier is turned ON or
the mode is cleared.
Default is No.
Memory Full Auto Scan Restart When the memory becomes full while
scanning originals, the machine can make
copies of the scanned originals first, then
automatically proceed scanning the
remaining originals.
If you select Yes: When the memory
becomes full, the machine stops operation
allowing you to remove the copy pages
delivered on the output tray.
If you select No: You can leave the machine
unattended to make all the copies, but the
resulting sorted pages will not be
sequential.
Default is No.
Select Stack or Rotate Sort Specify which Stack or Rotate Sort is
shown on the initial display with priority.
Default is Stack.