L&W LW 300 E Operating Instructions Manual Download | Manualshive

Page: 14 / 74

background image

LW 300 E / LW 450 E

Page A - 14

A

S A F E T Y P R E C A U T I O N S

Unit customised safety notices

Organisational measures

• In addition to the instruction manual, observe and comply with universally valid legal and other

obligatory regulations regarding accident prevention and environment protection.

• In addition to the instruction manual, provide supplementary instructions for supervision and

monitoring duties taking into consideration exceptional factors e.g. with regard to organisation
of work, production, personnel employed.

• Supervise personnel’s work in accordance with the instruction manual, taking into account safety

and danger factors.

• Observe all safety and danger notices on the compressor and check readability and complete-

ness.

Safety instructions operation

• Take measures to ensure that the machine is only taken into operation under safe and functional

conditions. Only operate the compressor if all protective and safety equipment, e.g. detachable
protective equipment, are provided and in good working order.

• Check the compressor at least once per day for obvious damage and defects. Inform the respon-

sible department / person immediately if anything is not as is should be (including operation per-
formance). Shut down the machine immediately if necessary and lock it.

• In case of malfunction, stop the compressor immediately and lock it. Repair malfunctions imme-

diately.

• If there is a failure in the electric energy supply, shut the machine / unit down immediately.

• Ensure safe and environmentally friendly disposal of consumables and old parts.

• The stipulated hearing protectors must be worn.

• Soundproofing equipment on the compressor has to be activated in safety function during ope-

ration.

• When handling with fats, oils and other chemical agents, observe the note for the product-

related safety.

Version: 261012-001 E

«
...
12
13
14
15
16
...
»

Summary of Contents for LW 300 E











































































Reviews:

No comments

Related manuals for LW 300 E

Brand: GEA Pages: 40

Brand: NARDI COMPRESSORI Pages: 85

Brand: Bitzer Pages: 40

ADLER /BARBOUR SERIES

Brand: Waeco Pages: 32

Brand: Scheppach Pages: 120

Brand: SABROE Pages: 78

Brand: DeWalt Pages: 16

Brand: Black & Decker Pages: 2

Brand: VIAIR Pages: 4

Brand: Chicago Pneumatic Pages: 86

Brand: FScurtis Pages: 48

Brand: Shure Pages: 8

Brand: Hamron Pages: 15

Brand: Gardner Denver Pages: 17

Brand: Gardner Denver Pages: 76

Brand: Pattfield Ergo Tools Pages: 74

Turbocor TTS Series

Brand: Danfoss Pages: 136

Brand: Central Pneumatic Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands