INTRO, SAFETY, INSPECTION AND DASH OPERATIONS
1-9
Technicians 250 Hour Checklist
Action Needed
Status
Landoll / Drexel
Lift
SAFETY & OPERATIONAL CHECKS
Have a qualified technician correct all
problems.
Description
OK - Yes, No
Comments
Mast, Carriage or Attachment
Clean, inspect for wear and lube.
Lift Chains
Clean and lubricate
Front Carry Position Setting
Distance between truck and sides
of mast must be even
90° Pivot and Reach Setting
Forks must have 3” reach and
mast must have 90° pivot
Pivot Arm Deflection
Check pivot arm’s deflection
when pivoting to travel position
Tilt Cylinder Racking & Degree Adjust
Check mast for racking when
tilting. Check fwd/rwd tilt angles
Attachment Control
Operational
Accelerator
Functioning smoothly
Controls (turn power on)
investigate unusual noises
Joystick
Check all functions
Dash Display
Check BDI, hourmeter
Parking Brake
Check for function
Service Brake
Check for leaks, shoe wear
Hydraulic Fluid Level
Check and fill
Exterior of Hydraulic Tank & Tank Breather
Clean
Lift and Power Steering Pumps
Clean dust from motors
Battery Box and Connector
Neutralize and clean
Battery
Thoroughly clean
Check electrolyte level
Check structure and electrical
conditions
Traction Motor
Clean dust from compartment
Seat Belt, Buckle, and Retractor
Functioning smoothly
Tires/Wheels
Remove debris, torque lug nuts
Wheel Bearings
Clean and fill with grease
Leaks
Gearbox, brake components,
hydraulic oil, battery
Hydraulic Hoses and Connections
Check for wear
Switches (Interlock, Direction, Parking/Seat,
Key)
Check for proper operation
Wire Harness
Check for abrasions
Pivot/Shift Assembly
Service bearing pads, grease
zerks, lubricate shift chain
OHG Mounting Bolts
Check and Retorque
Steering Gear
Inspect and Lube
Electrical Power Connections
Inspect & Retorque
https://www.forkliftpdfmanuals.com/
