OPERATION
9K713-0522
3-13
Speed-Up Kit - Optional
Seed rates can be doubled by using a 26 Tooth Sprocket
and following the procedure below: follows:
1. Loosen and remove #550 and #40 Drive Chains.
2. Remove 1/4-20 x 2 1/2 Bolt, Lock Washer and Nut
from #550 chain 12 Tooth Sprocket Hub on Front
Transmission Shaft.
3. Remove the 1/4 x 1-1/2 Roll Pin from 13 Tooth
Sprocket Hub on the Front Transmission Shaft.
4. Remove the Locking Collar from the left side of the
Front Transmission Shaft.
5. Move the shaft far enough to the right to remove the
13 Tooth Sprocket.
6. Install the new 26 Tooth Sprocket.
7. Replace all items (except #40 chain) in reverse order.
8. Add extra links to #40 chain.
9. Adjust chain tension.
Figure 3-14: Speed-Up Kit Setup
DRIVE CHAIN SET FOR
26 TOOTH SEED RATE
DRIVE CHAIN SET
FOR 13 TOOTH
SEED RATE
(DOUBLE
THE RATE SHOWN ON CHART)
Summary of Contents for Brillion Alfalfa SS108
