Landoll Brillion Alfalfa SS108, Operator'S Manual

Page: 38 / 92

2-22 9K713-0522
ASSEMBLY
TABLE OF CONTENTS
Acre Meter Kit - Optional
Not Used with Brillion Elite Mini Monitor
P/N 5K745 - Transmission w/o Clutches
P/N 5K275 - Transmission w/ Clutches
NOTE
The Acre Meter Kit consists of three main parts, the Acre
Meter, the Pick-Up Switch and the Magnet Wheel
Assembly. The Acre Meter Assembly is mounted on the
left side of the Front Seed Box.
IMPORTANT
Alignment of the Pick-Up Switch and the Magnet
Wheel Assembly is critical. Improper alignment will
cause the Acre Meter to record acres erratically or
not at all.
1. Use the Acre Meter Bracket as a guide and drill two
13/32" holes into the left Seed Box.
2. Attach the Acre Meter Bracket to the Seed Box with
3/8-16 x 1 Bolts, Flat Washers, Lock Washers and
Nuts.
See Figure 2-29.
3. Transmission w/o Clutch: Attach the Pick-Up
Switch Bracket to the front of the Transmission with
3/16 x 1-1/4 Bolts, Lock Washers and Nuts.
Transmission w/ Clutch - Optional: Attach the
Pick-Up Switch Mount to the Clutch Bracket with
#10-24 x 3/4 Screws, Lock Washers and Nuts.
See
Figure 2-31.
4. Attach the Pick-Up Switch to the top of the Pick-Up
Switch Bracket/Mount with two #8-32 x 1-1/4
Machine Screws, Flat Washers, Lock Washers and
Nuts. Do not tighten Screws at this time.
5. Press the Magnet Wheel Assembly onto the
Transmission Shaft until it is vertically centered with
the Pick-Up Switch.
6. Adjust the Pick-Up Switch and Pick-Up Switch
Bracket so the centerline of the Magnet Wheel
Assembly and Pick-Up Switch are horizontally and
vertically aligned with maximum 1/8" between the
Magnet Wheel Assembly and Pick-Up Switch.
Tighten all Screws.
See Figures 2-30 and 2-31.
Figure 2-29: Electronic Acre Meter
Pick-Up
Switch
Bracket
Pick-Up
Switch
Adhesive
Mount
Acre Meter
Bracket
Lock Washer,#8
Nut,#8-32
Screw,#6-32 x 1/2
Magnet Wheel
Assembly
Screw,#8-32 x 1-1/4
Flat Washer,#8
Bolt,
3/8-16 x 1-1/4
Nut,3/8-16
Lock Washer,3/8
Bolt,3/8-16 x 1
Flat Washer,3/8
Lock W
,3/8 asher
Nut,3/8-16