Landoll Brillion Alfalfa SS108, Operator'S Manual

Page: 20 / 92

2-4 9K713-0522
ASSEMBLY
TABLE OF CONTENTS
Pull Type Seeder Assembly
When shipped, Seeder comes assembled except for
Lights, Hub and Spindle Assemblies, Tire and Wheels
Assemblies and Drawbar.
1. Untie the two rolled up Drawbar Hydraulic Hoses near
the center of the Frame Tube. Ensure the hoses are
not interfering with where the Drawbar is to be
attached.
2. Center Drawbar in relationship with the Seed Box
Center Bracket. Attach Drawbar to Seeder Frame
Tube with 5/8-11 U-Bolts, Lock Washers and Nuts.
See Figure 2-6.
3. Attach the Hose Holder to the Drawbar with 5/8-11 x
1-1/2 Bolt, Lock Washer and Nut.
4. Install Manual Holder to Drawbar with Hose Clamps.
5.
8FT Seeders: Install SMV Mount to Seed Box Frame
with 1/2-13 U-Bolt, Lock Washers and Nuts. See
Figure 2-1.
10FT Seeders:
Install SMV Mount to Seed Box
Center Bracket with 1/2-13 x 1-1/2 Bolts and
Locknuts.
See Figure 2-2.
6. Apply anti-seize to Spindles and insert a Hub and
Spindle Assembly into each Wheel Arm. Secure with
1/2-13 x 3 Bolts and Locknuts.
See Figure 2-8.
Figure 2-6: Drawbar Installation
Nut,5/8-11
Lock Washer,5/8
Bolt,5/8-11 x 1-1/2
Hose Holder
Drawbar
Manual
Holder
Hose
Clamp
Nut,5/8-11
Lock Washer,5/8
U-Bolt,5/8-1 1