ASSEMBLING YOUR L&L EASY-FIRE KILN
easy-fire-install.pdf
3/1/2007 Rev 1.3
Page 1
2007
L&L Kiln Mfg, Inc. 505 Sharptown Rd, Swedesboro NJ 08085 P:856.294.0077 F:856.294.0070 [email protected] hotkilns.com
CAUTION:
There is a great deal of tension
created by the torsion spring . Use extreme
caution when installing it .
Wear safety goggles .
Use the special tool provided as directed . The
use of a tool that does not grab the end of the
spring to allow you to control it may result in
serious bodily injury . Call L&L if you do not
have this tool . We will provide it at cost for an
old kiln .
9) Next you are going to attach the other end of the
spring in through the slot on the right hand side of the
ring hinge piece (on the right side as you stand behind
the kiln) . This will require two people . Have one
person raise the lid into the upright position and hold
it there while the second person places the slotted end
of the spring tool through the top of the large hinge
piece and onto the spring .
10) Push the spring down as far as you can .
11) Continue to hold the lid upright .
12) Insert the hinge tool down into the body of the
hinge as shown and grab the spring with the notched
end . Using the hinge bar as a fulcrum push the end of
the spring into the first slot .
Put the hinge tool into the body of the hinge:
Top view:
You can also push the spring into place from the
back through the provided hole if you have room
to work behind the kiln.
ASSEMBLING YOUR L&L EASY-FIRE KILN
