background image

Genesis Treadmill Operation

38

 

3.2.

Motivational Screens

The Genesis treadmill has motivational screens that enhance 
your workout. To change the motivational screens tap the left or 
right arrows to move through the displays. 

3.2.1. Home Screen

The home screen offers 
a central location where 
the user can make 
program selections, 
client log in and view 
workout calendar, 
settings and 
entertainment options.

3.2.2. Statistics Screen

The Statistics screen 
provides all of the 
statistical information on 
one screen.

Volume

Tap the volume icon in the bottom right to raise or lower 
the volume of your headphones or speaker. (Speakers 
are not included)

Express 
Speed/
Incline

To quickly increase and/or decrease speed or incline, 
tap the speed or incline number on the console and a 
pop-up window will appear. This allows the user to 
select the desired number. Speed increases are capped 
for user safety.

Home

Tap the 

Home

 icon if you want to exit an app and return 

to the Entertainment screen.

Table 3-1 Genesis Control Panel Functions (Continued)

Function

Description

Summary of Contents for Move Series





























































Reviews: