Installation
31
Note:
To move the treadmill after it is fully assembled, perform
steps 9, 12, and 13.
9. There are wheels at the back of the treadmill that allow the
treadmill to be moved if needed. The running surface must
first be raised. To do this, carefully lift the rear of the running
bed until it locks into position between the handrails (Figure
2-20).
Figure 2-20. Lift and Lock Running Bed
10. Remove remaining packing foam and protective plastic.
11. Using two people, carefully rotate the treadmill off of its
shipping platform.
12. Using the handle on the underside of the running bed and
the small wheels at the ends of the base, carefully roll the
treadmill into the desired position, within 8 feet of a properly
grounded power outlet (Figure 2-21).
Figure 2-21. Move to Final Position
HANDLE
HANDLE
WHEELS