Installation
32
13. When treadmill is in desired location, release the locking
pin and carefully lower the running bed down to the floor.
14. Remove the left and right finishing covers from the
accessory box. Using 3 screws
E
per side, secure the
covers to the front of the frame (Figure 2-22). Start all three
screws before tightening them.
Figure 2-22. Install Finishing Covers
15. Remove the tablet/phone holder from the Accessories box.
Insert it into the slot in the console until it locks into place
(Figure 2-24). To remove if necessary, press the tab in the
center to release, and pull it out of the slot.
Figure 2-23. Install Tablet/Phone Holder
SLOT
RELEASE TAB