AB01A.C01
Service instruction POPL-I
Page 4/8
Prepared by: AJ/CML
Issued on: 01 March 1997
Approved by: SL
Rev. date: 12 March 2021
Rating plate
Type:
Unit type
3~mot.nr.:
Serial no.
V:
Connection voltage, star/delta
In:
Nominal power consumption at full load
Ist:
Start current direct
Hz:
Net frequency
kW:
Max. shaft power
IP:
Cage class
Cos
:
Power factor
RPM:
Motor revolutions per minute
Kg:
Weight of unit
Year:
Year of manufacture
Ins.Cl. F:
Insulation class F
Duty type S1:
Continuous working period
The rating plate states the motor's electrical data as well as the year of manufacture and the serial no. (3~Mot.nr.).
With regard to maintenance of a specific unit please state serial no. when contacting Landia.
Please note
It is important that the electrical cable is tightened to
prevent the cable from getting into contact with the
propeller. The cable can be ensured against damage
by means of a cable mesh or a chain.
Power connection
Every mixer is equipped with the above mentioned rating plate with technical motor data. It must be ensured that the
other electrical parts correspond to the motor data. For each mixer there is an electrical diagram.
For POPL-I mixers a protective motor switch and a softstarter must be applied.
Softstarter and frequency converter
Improper motor connection and incorrectly connected/used softstarter or frequency converter can lead to faults in
the machine's electric motor. Faults as a result are not covered by the machine's right of complaint.
Only a certified electrician is allowed to connect the unit.
Summary of Contents for POP-1
Page 18: ...0 1 2 3 4 2 0 0 1 0 0 1 1 0 1 1 0 2 3 4 5 6 7 4 8 9 4 7 5 6 7...
Page 84: ......
