7/14/08
7
Section 2 Important Safety Information
4200ATR Light Utility Vehicle 710-040M
Table of Contents
Safety Decals
1. Your 4200 All Terrain Light Utility Vehicle comes equipped
with all safety decals in place. They were designed to help
you safely operate this vehicle and to serve as a reminder to
keep safety uppermost in your mind. Read and follow decal
directions.
2. Keep all safety decals clean and legible.
3. Replace all damaged or missing decals. Order new safety
decals through your Land Pride dealer.
4. Some new equipment installed during repair requires safety
labels to be affixed to the replaced component as specified
by Land Pride. When ordering new parts or components,
also request corresponding safety decals.
818-543C
Danger: PD Guard Missing
838-303C
Danger: Battery (Located behind front grill)
20962
20963
5. Refer to this section for proper label placement. Install new
decals as follows
a.
Clean the area on which the decal is to be placed.
b.
Spray soapy water on the surface where the decal is to
be placed.
c.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
d.
Squeeze out air bubbles with the edge of a credit card.
