Section 3 Pre-Delivery and Check List
4200ATR Light Utility Vehicle 710-040M
7/14/08
12
Table of Contents
Section 3 Pre-Delivery and Check List
Pre-Delivery Certificate
The dealer is required to complete Land Pride’s
“Certificate of Light Utility Vehicle Pre-Delivery” form
before customer may take possession of the vehicle. The
form information must be filled in and check list checked
off or initialed by individuals performing the checks.
Dealership’s name, signatures of individuals filling in the
form, seller’s signature, customer’s signature, and signing
dates are also required before the form is returned to Land
Pride. Below is a list of the information found in the form
that is required to be completed and checked off.
Each vehicle must undergo a Pre-Delivery Inspection by the Dealer. Listed below is an example of the checklist that is
included with the Warranty Registration that is to be submitted to Land Pride upon Retail Sale. The Pre-Delivery
Certificate and Warranty Registration must be submitted to Land Pride in order to activate the vehicle warranty.
___Make sure all safety decals are in place.
___Check headlights to make sure they are working and
are properly mounted.
___Check tail lights and brake lights to make sure they are
working and are properly mounted.
___Inspect air cleaner element. Make certain it is clean
and in place.
___Inspect the fuel tank to make sure it is properly
installed and that there are no leaks.
___Check fuel level to make sure there is at least 1/8 of a
tank of gas prior to performing initial starting
operations.
___Inspect fuel lines to make sure they are properly
installed and that there are no leaks.
___Check steering by executing a full lock to lock turn in
each direction.
___Check park brake to make sure it will engage, hold and
release.
___Make sure neutral start feature is working by trying to
start the unit while the shifter is located in the forward
and reverse positions.
___Check throttle control to make sure it moves and
returns freely.
___Check differential oil level at the differential oil plug.
Add 80/90 gear lube if oil is below oil plug outlet.
___Check overall appearance for cleanliness and for body
and molding damage.
Vehicle Information
Model No.
_________________
Date
_________________
Serial No.
_________________
Engine Serial No.
_________________
Dealer Service and Inspection List
___Fully charge battery. Check battery voltage to verify
that it is fully charged.
___Connect negative battery cable. (Negative battery
cable is disconnected before leaving the factory and is
to be disconnected after initial dealer set-up to prevent
battery discharge while setting on the dealer lot.)
___Check fuel valve lever to make sure it is in the correct
position. See "Engine Fuel Valve Lever" on page 23
for additional information.
___Check Battery voltage and recharge if required.
___Check tire pressure to make sure front and rear tires
have 7 psi.
___Make sure wheel lug bolts/nuts are tightened to 90
Newton meters/(65ft. lbs.).
___Check Master Cylinder to make sure it is filled.
___Check engine oil level at the dipstick. Add SAE 10W30
oil if oil is below the full mark on the dipstick.
___Check engine for correct RPM. Set to factory
specification if needed.
___Check Tie Rods for tightness
___Check Choke Control. It should move and return
freely.
___Step on foot brake to make sure there is plenty of
pedal and that brakes hold pressure and do not bleed
off. Add brake fluid and bleed brakes if required.
___Make sure seats and seat belts are properly fastened
to the frame.
