Land Pride 3P1006NT Operator'S Manual Download Page 8

Page: 8 / 92

Important Safety Information

Table of Contents

3P1006NT 313-521M

2019-07-18

Practice Safe Maintenance



Understand procedure before doing work. Use proper

tools and equipment. Refer to this manual.



Work in a clean, dry area.



Lower the drill, put tractor in park, turn off engine, and

remove key before performing maintenance. If work

must be performed with implement raised, use blocks or

jackstands rated for the drill weight.



Make sure all moving parts have stopped and all system

pressure is relieved.



Allow drill to cool completely.



Disconnect battery ground cable (

) before servicing or

adjusting electrical systems.



Welding: Disconnect battery ground. Avoid fumes from

heated paint.



Inspect all parts. Make sure parts are in good condition

and installed properly.



Remove buildup of grease, oil or debris.



Remove all tools and unused parts from drill before

operation.

Safety At All Times

Thoroughly read and understand the instructions in this

manual before operation. Read all instructions noted on

the safety decals.



Be familiar with all drill functions.



Operate machinery from the driver’s seat only.



Do not leave drill unattended with tractor engine running.



Do not stand between the moving tractor and drill during

hitching.



Keep hands, feet and clothing away from power

driven

parts.



Wear snug

fitting clothing to avoid entanglement with

moving parts.



Make sure all persons are clear of working area.

Summary of Contents for 3P1006NT





























































































Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands

Land Pride 3P1006NT, Operator'S Manual

Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands