Land Pride 3P1006NT Operator'S Manual Download Page 18

Page: 18 / 92

Preparation and Setup

Table of Contents

3P1006NT 313-521M

2019-07-18

Preparation and Setup

This section helps you prepare your tractor and drill for

use.

Pre

Delivery Setup

If the drill has just been delivered, or has been broken

down for re

shipment, this item needs to be completed

prior to first field use:
• See “

You may also need to install features, options and

accessories that are not factory

installed, including:

• “

Carbide Disc Scraper Installation

” on page 84.

• “

Weight Bracket Installation

” on page 85

• Native Grass Seed Rate Reduction installation, found

in manual 202-583M in the Reduction kit.

Pre

Planting Setup

The balance of this section covers items that need to be

completed or checked prior to each field use of the drill.

Pre

Setup Checklist

1. Read and understand “

Important Safety

Information

” on page 1.

2. Check that all working parts are moving freely, bolts

are tight, and cotter pins are spread.

3. Check that all grease fittings are in place and

lubricated. See “

Lubrication and Scheduled

Maintenance

” on page 48.

4. Re-connect any seed or fertilizer hoses

disconnected for storage. See “

Attach Meter Hoses

at Rows

” on page 82.

5. Check that all safety decals and reflectors are

correctly located and legible. Replace if damaged.

See “

Safety Decals

” on page 5.

6. Inflate tires to pressure recommended and tighten

wheel bolts as specified. See “

Appendix A

Reference Information

” on page 58.

Summary of Contents for 3P1006NT





























































































Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands

Land Pride 3P1006NT, Operator'S Manual

Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands