![background image](http://html1.mh-extra.com/html/land-pride/3p1006nt/3p1006nt_operators-manual_673059050.webp)
Maintenance and Lubrication
3P1006NT 313-521M
2019-07-18
46
Eye bolt Adjustment
It may occasionally be necessary to make adjustments to
the eye bolts at the top of the lift
-
assist weldments, for
example:
• lowered position is too high even with no spacers on
the cylinder rod.
To make adjustments:
1. Determine what change in drill height is required.
2. Hitch the drill to the tractor’s 3
-
point lift arms. Raise
the drill, and support the rear tool bar on jack stands.
3. Loosen the jam nut .
4. Rotate the adjuster nut (under weldment top, not
visible in figure) by the amount of height change
required. Moving the eye bolt lower increases
height. Moving the eye bolt higher decreases height.
5. Tighten the jam nut.
6. Lower the drill and check the setting.
The factory setting for eye bolt reveal is:
3
1
/
2
in. (88.9 mm)
Figure 36
Lift
-
Assist Eye Bolt
32060
3.5 in. (88.9
mm)
3
1
2
4
1
2
3
4
Summary of Contents for 3P1006NT
Page 91: ......