Land Pride 3P1006NT Operator'S Manual Download Page 50

Page: 50 / 92

Maintenance and Lubrication

Table of Contents

3P1006NT 313-521M

2019-07-18

Eye bolt Adjustment

Refer to Figure 36

It may occasionally be necessary to make adjustments to

the eye bolts at the top of the lift

assist weldments, for

example:
• lowered position is too high even with no spacers on

the cylinder rod.

To make adjustments:
1. Determine what change in drill height is required.
2. Hitch the drill to the tractor’s 3

point lift arms. Raise

the drill, and support the rear tool bar on jack stands.

3. Loosen the jam nut .
4. Rotate the adjuster nut (under weldment top, not

visible in figure) by the amount of height change

required. Moving the eye bolt lower increases

height. Moving the eye bolt higher decreases height.

5. Tighten the jam nut.
6. Lower the drill and check the setting.
The factory setting for eye bolt reveal is:

in. (88.9 mm)

Figure 36

Lift

Assist Eye Bolt

32060

3.5 in. (88.9

mm)

Summary of Contents for 3P1006NT





























































































Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands

Land Pride 3P1006NT, Operator'S Manual

Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands