Land Pride 3P1006NT Operator'S Manual Download Page 77

Page: 77 / 92

Appendix B

Pre

Delivery

Table of Contents

2019-07-18

3P1006NT 313-521M

Appendix B

Pre

Delivery

Figure Callouts

Connector Identification

Refer to Figure 38

JIC

Joint Industry Conference (SAE J514)

Note straight threads and the



cone on “M” fittings (or 37



flare on “F”).

ORB

Ring Boss (SAE J514)

Note the straight threads and,

elastomer O

Ring .

Fittings needing orientation, such as the ell above,

also have a washer and

jam nut (“adjustable thread port stud”)

Unload Truck

The 3P1006NT drill is delivered by flatbed truck. When

coordinating the unload with the Great Plains driver, plan

to position the partially assembled drill at a spot with:
• at least 10 ft. (3 m) clearance behind the press

wheels,

• tractor access in front,
• ample light,
• flat, level and dry surface.

Tools required for installation:

• hoist with 500 lb (277 kg) capacity,
• basic hand tools

to ,

callouts identify components in the currently

referenced Figure or Figures. These num

bers may be re

used from page to page.

callouts reference existing parts exchanged

or temporarily removed parts. The descrip

tions match those on the cartons, bags or

item tags, as well the current Parts Manual.

(Ref.Page)

callouts reference new parts The descriptions

match those in the current drill Parts Manual.

Figure 38

Hydraulic Connector ID

25188

Fittings Torque Values

Fitting

Lbs

JIC

ORB w/jam nut

ORB straight

JIC

101

117

Summary of Contents for 3P1006NT





























































































Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands

Land Pride 3P1006NT, Operator'S Manual

Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands