Land Pride 3P1006NT Operator'S Manual Download Page 41

Page: 41 / 92

Adjustments

Table of Contents

2019-07-18

3P1006NT 313-521M

Opener Depth (Press Wheel Height)

A press wheel attached to each opener body controls

seeding depth. To maintain consistent depth, the

relationship between the bottom of the opener discs and

press wheel is fixed upwardly by an adjustable stop on

each opener.
The press wheels also close the seed trench and gently

press soil over seed. To provide consistent soil firming,

press wheels are free to move down from normal

operating position. This maintains pressing action even if

opener discs encounter obstructions or hard soil.

Refer to Figure 26

Set opener seeding depth by adjusting press

wheel

height. To adjust, first raise drill slightly, then lift and slide

handles on top of openers.

• For shallower seeding, slide T

handles toward drill.

• For deeper seeding, slide T

handles away from drill.

Figure 26

Press Wheel Adjustment

15659

Summary of Contents for 3P1006NT





























































































Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands

Land Pride 3P1006NT, Operator'S Manual

Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands