56
Section 6: Specifications & Capacities
ZT60i & ZT72i (S/N 748109-) Accu-Z
®
Zero Turn Mowers 357-398M
4/1213
Table of Contents
Front Tires
13x6.5 - 6, Rib tire
Hour Meter
Standard equipment
Fuel Capacities
12.2 US GAL.
Steering Type
Twin lever steering provides independent control of each drive wheel
Twin Lever Steering Controls
Speed, forward, reverse, brake, and turns
Steering Turning Radius
True zero degree. Turns with counter-rotating independent drive wheels
Hydraulic Brake Service
Hydrostatic dynamic braking
Park Brakes
Automotive style drum brakes, manual activated
Ground Speed
Forward: 0-13 MPH
Reverse: 0-6 MPH
Wheel Drive
Single V-belt with spring tension idler pulley
Electrical Operated Logic-Control
Safety Features
Electric logic-control system governs blade engagement, forward & reverse motion,
engine starting & running, and parking brake functions.
Evaporative Emission Control
System on EPA Compliant Mowers
This equipment uses a sealed fuel system which incorporates a non-vented fuel cap.
Evaporative emissions are vented to the engine where they are combusted during
normal engine operation.
Seat Options
Deluxe cushion seat with arm rests
Optional Suspension seat with arm rest
Optional Deluxe seat with arm rest and spring Kit
Mainframe Construction
Welded steel
Drive Motor Mount
Fabricated from 1/4" steel plate
Front Caster Wheels
Free turning with greasable roller bearings
Front Caster Forks
3/8” steel
Front Wheel Spindles
Coil Spring Suspension
Pivoting Front Axle
Front axle can be locked or unlocked
Deck Thickness
10 Gauge deck with 11 gauge doubler plate
and 3/16" reinforcement plate connecting spindle housing mounts
Box-Section Reinforced Front Edge
10 Ga. thick
Deck Trim Edges
Solid 1” x 3/8” steel bar for reinforced trim edge & doubled plated 10 gauge front edge
Deck Housing Depth
5 3/16” deep, (room for high-capacity mowing)
Deck Lift
Foot-operated deck height adjustment with transport position
Pin for setting height
Hand Operated Controls
Ignition switch, throttle lever, control levers, park brake lever,
blade engagement switch, choke knob and Fuel Tank Selector Valve
Indicators
Engine warning light and hour meter
Cup Holder
Two cup holders molded into the left side fuel tank
They accommodate nearly any cup size
Cutting Heights
Height adjustment in 1/4" increments from 1” to 5”
Mowing Blades
Heavy-duty, heat-treated, high-lift Fusion
®
edge
.25" x 2 1/2" x 21"
.25 x 2 1/2” x 25”
Blade Tip Speed
18,350 FPM
18,800 FPM
Blade Drive
Electric clutch drive with single V-belt to three spindles and spring tension idler pulley
Spindles
Machined ductile iron housing, 1 3/8" diameter high carbon steel shafts
and greasable ball bearings
Deck Suspension
Free-floating deck using three blades with center blade to the front
Four point chain suspension with counter balance springs
Anti-Scalp Rollers
4 Anti-scalp rollers to improve flotation in rolling and uneven terrain.
General Specifications
Mower Model No
ZT60i
ZT72i