Land Pride 357-398M, Operator'S Manual, Page: 40 / 68

38
Section 5: Maintenance & Lubrication
ZT60i & ZT72i (S/N 748109-) Accu-Z
®
Zero Turn Mowers 357-398M 4/1213
Table of Contents
Maintenance Locations
Your Accu-Z Zero Turn Mower is designed with innovative and state-of -the art components that should be maintained.
Knowing the location and how to maintain these components is the best prevention for costly downtime or expensive,
premature repair. Become familiar with the components listed below. Most will be reviewed in this section.
Top View of Deck
Figure 5-2
30105
1
2
3
4
5
6
1
8
7
Bottom view of Deck
Figure 5-3
30106
9
10
11
12
Refer to Figure 5-2:
1. Pulley Guards
2. Over-Center Belt Tensioner
3. Deck Belt Tensioner Spring
4. Deck Belt
5. Deck Tension Idler
6. Anti-Scalp Wheels
7. Blade Spindle Zerks (3)
(1)Under floor panel
(2) Through opening in pulley guards
8. Discharge Chute
Refer to Figure 5-3:
9. Blade Bolt
10. Blade Washer
11. Cutting Blades
12. Deck Underside
Refer to Figure 5-4:
13. Engine Oil Fill & Dipstick
(Located under air cleaner mount.)
14. Engine Oil Drain Plug
(Located under air cleaner mount.)
15. Engine Oil Filter
16. Engine Oil Cooler
17. Engine Air Cleaner
18. Fuel Filter
19. Hydraulic Oil Filter (2)
20. Hydraulic Oil Expansion Tank (2)
(For level check and adding oil.)
21. Seat Release Latch
22. Battery (located under seat)
23. Operator Presence Switch
(Located under seat.)
24. Reservoir Shield (2)
25. Hydraulic Oil Fill Plug (2)
(For initial fill & oil changes only.
Located under the reservoir shields.)
26. Caster Wheel Bearing Zerk (2)
27. Floor Panel
28. Floor Panel Lift Handles
29. Left/Right Fuel Tank Valve
(Also see Figure 2-3 on page 16)
30. Seat Adjustment Latch
31. Control Lever Stops (2)
Refer to Figure 5-5:
32. Hydraulic Oil Drain Plug (2)
33. Electric Clutch Pulley
34. Ground Drive Belt
35. Ground Belt Tension Idler
36. Ground Belt Tension Idler Spring
37. Deck Lift Pivot Zerks (4)
38. Pivot Grease Zerk
(Located under axle.)
39. Pivot Axle
40. Caster Wheels (2)
41. Drive Wheels (2)
42. Idler Arm Pivot Zerk
(Located above pivot pin)
43. Electric Clutch Bolt