Lancom VP-100, Manual

Page: 15 / 50

LANCOM VP - 100
쮿
Chapter 2: Basic configuration of the LANCOM VP
-
100
15
EN

If the installation wizard starts in the display when the device is
switched on, confirm the suggested values and then access the menu
to read out the IP address.
햳
Start your browser and enter the current IP address for the device into the
address field. You can omit any leading zeros in the blocks of numbers
(e.g. if '192.168.001.050' is displayed, enter '192.168.1.50' into your
browser). In the top right-hand corner you can select the language for the
configuration.

If the LANCOM VP-100 cannot retrieve an IP address from a DHCP
server, then it uses the standard IP address '172.23.56.253'. In this
case, the computer which is to be used to carry out the configuration
needs to have a fixed IP address from which '172.23.56.253' can be
reached.

If the LAN also has a DNS server for name resolution and this
communicates the allocation of IP addresses and names to the DHCP
server, then the LANCOM VP-100 can be reached under the name
'VP-100-<MAC address>' (e.g. "VP-100-00a057xxxxxx"). You will
find the MAC address on a sticker on the base of the device.
2.2.3 The Installation Wizard
This Installation Wizard assists you with the initial basic configuration of the
LANCOM VP-100. It carries out the following settings:
쮿
The method of address allocation (static, DHCP, PPPoE)
쮿
Parameters for network connections
쮿
Information for SIP registration