Lancom VP-100, Manual

Page: 29 / 50

LANCOM VP - 100
쮿
Chapter 4: Advanced configuration
29
EN

This parameter only has to be adjusted if this is required by the SIP
gateway and SIP proxy being used. Refer to the documentation from
the corresponding manufacturers.
4.3.2 SIP account settings
In the 'Account settings' area you can enter the parameters for your SIP
account:
쮿
SIP ID/Name: The telephone number of your SIP account.
쮿
Display name: The name for display to the person you are calling. If the
display name is left blank, the number of your SIP account will be
displayed instead.

The display name is only displayed if the SIP protocol is supported by
the telephone infrastructure of the person you are calling.
쮿
Authentication name: The User ID or SIP ID of your SIP account.
쮿
Authentication password: Your SIP-account password.
쮿
Password confirmation: Confirmation of your SIP-account password.

The entry of further data, e.g. MWI information (Message Waiting
Indication) is only required if your SIP provider explicitly gives you this
information.