LANCOM VP
-
100
쮿
Chapter 3: Making telephone calls with the LANCOM VP
-
100
24
EN
쮿
When using a headset, accept the call by pressing the 'Headset' function
key.
쮿
Press the key
, use
to go to 'accept' and
.
3.3
Options during telephone calls
The following telephone operations are available to you via the keypad and
function keys:
쮿
Adjust volume
The keys
and
allow you to adjust the volume of the ring tones
and of the handset/headset loudspeaker.
쮿
Switching between handset and speakerphone
You can switch between the handset and speakerphone mode at any time
during a call.
왏
While telephoning with the handset, press the speakerphone key
and replace the handset in its cradle.
왏
While telephoning in speakerphone mode, lift up the handset and
then press the speakerphone key
.
쮿
Accepting calls
If the telephone rings during a call you can open the options with the
key. Use the
keys to select the menu entry 'Accept' and confirm
your selection with the key
. The second call is accepted and the
previous call is placed on hold.
쮿
Rejecting calls
When the telephone rings you can open the options with the
key. Use
the
keys to select the menu entry 'Reject' and confirm your
selection with the key
. The incoming call is then rejected.
쮿
Mute
To activate mute during a call, press the
key. To deactivate mute
again, press the
key again.
쮿
Holding and continuing with calls
To place a call on hold, press the Flash/Call hold key. The caller can no
longer hear you and you can, for example, conduct a second call on
another line.
To continue with a call which is on hold, press the Flash/Call hold key
again.
Summary of Contents for VP-100
Page 1: ...LANCOM VP 100...