LANCOM VP
-
100
쮿
Chapter 2: Basic configuration of the LANCOM VP
-
100
13
EN
If you do not wish to conduct the quick installation via keypad, then
simply confirm the values as suggested by the installation wizard and
configure the device via the web interface.
2.1.1
No local authentication
If local authentication in the LANCOM VoIP Router is
not activated
, the
LANCOM VP-100 merely requires a telephone number to register.
햲
After starting the LANCOM VP-100, LANCOM Easy Setup appears in the
display. Use
to select the language for the configuration and
confirm with
.
햳
When requested to enter the 'Telephone number' enter the internal
telephone number or the SIP name for the device.
To enter alphanumerical characters you use the hash key to toggle the
input mode between digits, lower-case and upper-case letters.
햴
Confirm your entries with the key
.
The LANCOM VP-100 now tries to register with the LANCOM VoIP Router with
the number entered:
쮿
Registration will succeed if the LANCOM VoIP Router is configured to
allow registration without authentication. If this is the case then the
telephone displays its name as 'VP-100'.
쮿
If it is not possible to carry out registration without authentication, then
LANCOM Easy Setup continues to request further information.
2.1.2
With local authentication
If local authentication in the LANCOM VoIP Router is
activated
, the LANCOM
VP-100 requires the telephone number, a registration ID and a registration
password to register.
햲
After entering the telephone number you will be prompted for the
'Authentication Name'. Enter the 'Authentication user name' from the
entry for the SIP user here. Confirm your entries with the key
.
햳
In the next step, enter the 'Password' from the entry for the SIP user.
Confirm your entries with the key
.
The LANCOM VP-100 now again tries to register with the LANCOM VoIP
Router with the number entered, the registration ID and the password.
Summary of Contents for VP-100
Page 1: ...LANCOM VP 100...
