LANCOM VP
-
100
쮿
Chapter 4: Advanced configuration
42
EN
A text file with the name of “Lancom-GENERAL.cfg” must be saved to
the selected configuration directory, e.g. “cfg”. This file should con-
tain the following entries:
[fupdate]
fupdate_image_name=LC-VP100-3.03.0049.upv
Here, “LC-VP100-3.03.0049.upv” is the name of the firmware file
stored to this directory and intended for firmware distribution, e.g.
“image”.
쮿
Provision retry interval, limit: If the first attempt to load the firmware or
configuration fails, you can define the number of attempts to be made
and the time interval between them in seconds.
4.7
Logout
In the 'Logout' area you can logout of the configuration interface or you can
prompt a reboot of the device.
Summary of Contents for VP-100
Page 1: ...LANCOM VP 100...
