background image

250

STARTING 
THE ENGINE

IMPORTANT

The car is equipped

with electronic engine immobilising
system. If the engine fails to start,
see paragraph “Lancia CODE sys-
tem”.

We recommend that

during the initial period
you do not drive to full

car performance (e.g.: excessive
accelerations, long journeys at
top speed, sharp braking etc.).

It is dangerous to let the

engine run in a garage or
other closed area. The

engine consumes oxygen and
gives off carbon oxide, a poiso-
nous gas.

The ignition device is fitted with a

safety device which obliges the dri-
ver to return the key to 

STOP

posi-

tion before repeating the starting
procedure.

In the same way, when the engine

is running, this device prevents any
shift from 

MAR

to

AVV

.

Never leave the ignition

key at MAR when the
engine is off to prevent

battery draining due to current
absorption.

DRIVING YOUR CAR

Summary of Contents for THESIS CONNECT



































































































































































































































































































































































































Reviews: