Lancia THESIS CONNECT, Owner'S Handbook Manual

Page: 42 / 386

41
SWITCHING THE ALARM OFF
To switch the alarm off, press the
key button A ( fig. 14 ).
The following actions will be car-
ried out by the system (with the
exception of certain markets):
– the direction indicators will flash
twice;
– two beeps will be heard;
– driver’s door or doors unlocking,
depending on the setting selected on
the CONNECT menu.
IMPORTANT When operating the
central door unlocking with the
metal insert of the key, the alarm is
not deactivated.
VOLUMETRIC PROTECTION
Do not leave passengers or pets in
the parked car and completely close
the windows and the sunroof to
ensure the correct operation of the
volumetric sensors. Furthermore,
make sure that the doors, bonnet
and boot/tailgate are properly
closed.
To deactivate the volumetric
protection, press button A ( fig. 16 )
on the front ceiling light: when the
function is off, the button warning
light will flash for about 3 seconds
and then goes out.
Protection cut out stays on until
activating the central door opening
again.
IMPORTANT Volumetric protec-
tion shall be deactivated after about
1 minute from turning the key to
STOP . To deactivate the volumetric
protection after this period, turn the
key to
MAR and then to STOP
again.
ANTI-LIFTING SENSOR
The anti-lifting sensor detects vari-
ations in slant to signal lifting or
partial lifting (e.g. to remove a
wheel) of the car.
The sensor can detect minimal
variations in cat trim along both the
longitudinal axis and the transversal
axis. Variations in trim lower than
0.5°/min. (such as, for example, a
slow deflating tyre) are not take into
account.
To switch the anti-lifting protec-
tion off, press button B ( fig. 16 ) on
the front ceiling light: when the
function is off, the button warning
light will flash for about 3 seconds
and then goes out.
To ensure correct opera-
tion of the volumetric pro-
tection system, before acti-
vating the alarm, check that win-
dows and sunroof (where pro-
vided) are perfectly closed.