8
A
B
A. Position Over
Valve Plates
B. Merchandiser
B
A
A. Push in Tab
B. Side Bracket
5. Position the lower edge of the merchandiser over each of
the valve plates.
6. Guide the edges of the merchandiser up, to the outside of
the side brackets of the unit.
7.
Hook the top of the merchandiser to the manual fill ice
chute. It is recommended to remove the front ice bin lid
before installation.
8. Verify that the connection tabs are locked in the openings
on the sides of the merchandiser.
Merchandiser needs to be installed over the valve
plates for proper installation.
NOTE
CORRECT
INCORRECT
1.
To remove the merchandiser, first detach the left and right
side of the merchandiser from the connection tabs by
pulling away from the unit.
A
B
A. Detach from
Connection Tab
B. Merchandiser
A
B
C
A. Rotate from Bottom
B. Merchandiser
C. Connection Tab
2. Rotate the merchandiser, away from the unit, from the
bottom to disengage from valve block.
Merchandiser Installation/Removal
3. Lift the merchandiser straight up to detach from the top of
the ice bin and remove from the unit.
4.
To install the merchandiser, firmly push the connection tabs
toward the center of the unit in order to create a clear path
for the install.
Summary of Contents for Sensation 44
Page 25: ...25 Flavor Shot Box Plumbing Diagram Unit Plumbing Diagram ...
Page 26: ...26 Wiring Diagram 115 Volt ...
Page 27: ...27 Wiring Diagram 220 240 Volt ...
Page 29: ...29 ...