background image

Freser (MALAYSIA) SDN. BHD. -
Malaysia

No. 31, Jalan TPP 5/13, Taman
Perindustrian Puchong, Seksyen 5,
47100 Puchong, Selangor, Malaysia
Phone: 60-3-8061-6666
FAX: 60-3-8062-1007
e-mail: [email protected]

Freser (S) Pte Ltd - Singapore

621 Aljunied Road
#02-09 Lipo Building
Singapore 389834
Phone: 65-6746-8191
FAX: 65-6746-8196
e-mail: [email protected]

Freser International Corporation - Taiwan

No. 76, Gui-Sui Street
Taipei 103, Taiwan R.O.C.
Phone: 886-2-2553-1555
FAX: 886-2-2553-2742
e-mail: [email protected]

Freser Makasan International Co., Ltd -
Thailand

Freser Makasan International Co., LTD.
Navanakorn Industrial Estate Zone 4
95/3 Moo 13, Klongnung, Klongluang
Patumthani 12120, Thailand
Phone: 662 520-3457 (Automatic, 7 lines)
FAX: 662 529-3840
e-mail: [email protected]

Lancer - Indian Sub-Continent

India

Shabbir Shafiqui - Area Manager

India and Sub-Continent

B-7, Pannalal Silk Mill Compounds
78, LBS Marg, Bhandup (W)
Mumbai 400-078, India
Phone: 91-22-25966665
Cell No: 91-9867554152
FAX: 91-22-5637-4018
e-mail: [email protected]

Lancer Authorized Distributors

Western Refrigeration Ltd - India

B-7, Pannalal Silk Mill Compounds
78 L.B.S. Marg, Bhandup (W)
Mumbai 400-078, India
Phone: 91-22-25966665

91-22-25962253

FAX:

91-22-25962257

e-mail: [email protected]

Bengal Marketing Company -
Bangladesh

Skylark Point (6th Floor)
Room #G-2
24/A Bijoy Nagar,
Dhaka-1000, Bangladesh
Phone: 880-2-934-2987
FAX: 880-2-935-0127
e-mail: [email protected]

Dynamic Equipment - Pakistan

Dynamic Equipment and Controls (Pvt.) Ltd.
F-1/23, Canal Cottages, Block-D.
New Muslim Town.
Lahore. Pakistan.
Phone: 0092-42-583-6737

0092-42-583-6787

FAX: 0092-42-586-7924
e-mail: [email protected]

[email protected]

Lancer Authorized Distributors

Indonesia

P.T. Dikarunia Sejahtera - Indonesia
JI. Gelong Baru Tengah #1A
Tomang, Jakarta, Barat 11440
Indonesia
Phone: 62-21-5694-3245
FAX: 62-21-560-6889
e-mail: [email protected]

Philippines

RBP Industrial Sales, Inc. - Philippines
Unit 20, 2/F, Facilities Centre Bldg.
548 Shaw Blvd
1552 Mandaluyong City
Philippines
Phone: 632-531-1221/1215/1289
FAX: 632-531-1271
e-mail: [email protected]

[email protected]

Lancer Asia

International Sales

6655 Lancer Blvd.
San Antonio, TX 78219
Phone: (210) 310-7000
FAX: (210) 310-7242
1-800-729-1500
e-mail: [email protected]

Hong Kong

Patrick Co - Director Asia
Flat A, 24/F., Houston Industrial Bldg.
32-40 Wang Lung Street
Tsuen Wan, N. T., Hong Kong
Phone: 852-94302585
FAX: 852-24082605
e-mail: [email protected]

Lancer Authorized Distributors

Shanghai Freser International Co Ltd. -
China

1856, Hu Tai Road
Shanghai, 200436, China
Phone: 86-21-5650-3555
FAX: 86-21-5650-2666
e-mail: [email protected]

Freser (HK) Company Ltd - Hong Kong

Flat A, 24/F., Houston Industrial Bldg.
32-40 Wang Lung Street
Tsuen Wan, N. T., Hong Kong
Phone: 852-2408-2595
FAX: 852-2408-2605
e-mail: [email protected]

Hayakawa Sanki - Japan

Hayakawa Sanki, Inc.
1-13-13, Kayaba-cho
Nihonbashi, Chuo-ku
Tokyo, 103-0025
Japan
Phone: 03-5651-1481
FAX: 03-5651-1445
e-mail: [email protected]

Tahoe Corporation - Korea

Tahoe Corporation
2FL, 835-66 Yocksam-dong
Kangnam-Ku
Seoul, Korea
Phone: 82-2-557-5612, -5614
FAX: 82-2-557-5615
e-mail: [email protected]

(Continued from previous page)

Lancer Chile Ltda. - Chile

Contact: Heriberto Concha
Vicuna mackenna 3019, San joaquin
Santiago, Chile
Phone: 56-2-5521657
FAX: 56-2-5521961
e-mail: [email protected]

Lancer Pacific

Web Site:  www.lancerpacific.com

Australia

Lancer Pacific Pty Ltd
5 Toogood Avenue
Beverley 5009
PO Box 331
Welland 5007
South Australia
Phone: 61-8-8268-1388
FAX: 61-8-8268-1978
e-mail: [email protected]

(Managing Director, Lancer Pacific)
[email protected]
(for Fountain/soft drink)
[email protected]
(for Draught Products)

New South Wales / ACT

Lancer Pacific Pty Ltd
Unit 8, 2 Holker Street
Newington 2127
New South Wales
Australia
Phone: 61-2-9648-6840
FAX: 61-2-9648-6850
e-mail: [email protected]

Victoria / Tasmania

Lancer Pacific Pty Ltd
55 Keele Street
Collingwood 3066
Victoria
Australia
Phone: 61-3-8415-1920
FAX: 61-3-8415-1929
e-mail: [email protected]

Queensland / Northern Territory

Lancer Pacific Pty Ltd
Unit 27, 256-258 Musgrave Road
Coopers Plains 4108
Queensland
Australia
Phone: 61-7-3274-5700
FAX: 61-7-3875-1805
e-mail: [email protected]

Western Australia

Lancer Pacific Pty Ltd
24 Ernest Clark Road
Canning Vale 6155
Western Australia
Ph:  61-8-9455-2722
Fax:  61-8-9455-2455
Email: [email protected]

New Zealand

Lancer Pacific Ltd
9 O’Rorke Street
Onehunga, Auckland
POBox 12-523
Penrose, Auckland
New Zealand
Phone: 64-9-634-3612
Mobile Phone: 64-21-745-389
FAX: 64-9-634-1472
e-mail: [email protected]

[email protected]

36

Directory of USA - Canada Offices,

International Offices, and Authorized Distributors

(Continued)

dinecompany.com

Summary of Contents for ESCORT III









































Reviews: