IMPORTANT SAFEGUARDS — SAVE THESE INSTRUCTIONS
•
Read all instructions.
•
To protect against risk of electrical shock, do not put motor base or wiring
in water or other liquid.
•
Close supervision is necessary when any appliance is used by or near children.
•
Unplug your juicer from outlet when not in use, before putting on or taking
off parts, and before cleaning.
•
Avoid contacting moving parts.
•
DO NOT
operate this or any appliance with a damaged cord or plug, or
after the appliance malfunctions or it is dropped or damaged in any manner.
Return appliance to the nearest authorized service facility for examination,
repair or electrical or mechanical adjustment.
•
The use of attachments not recommended or sold by the manufacturer may
cause fire, electrical shock or injury.
•
DO NOT
use outdoors.
•
DO NOT
let cord hang over edge of table or counter, or touch hot surfaces.
•
DO NOT
place near a hot gas or electric burner or in a heated oven.
•
DO NOT
use appliance for other than intended use.
•
Always make sure juicer cover is clamped securely in place before motor is
turned on.
DO NOT
unfasten clamps while juicer is in operation.
•
Be sure to turn switch to
off
position after each use. Make sure the motor
stops completely before disassembling.
•
DO NOT
put your fingers or other objects into the juicer opening while it is
in operation. If food becomes lodged in opening, use food pusher or another
piece of fruit or vegetable to put it down. When this method is not possible,
turn the motor
off
and disassemble juicer to remove the remaining food.
The switch on the bottom of the machine is a thermal protection device.
Should the juicer overheat for any reason this switch will cut off the electrical
current and the machine will stop, thus saving it from possible damage
or fire. To restart, simply push the switch and the juicer will again function
normally.
•
This juicer is for household use.
WARNING:
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
OMG-230_O2manual_v5.qxd 8/31/04 3:06 PM Page 1
