current massaging (EMS) will stimulate the tis-
sue of the sells to boost firming up of the skin.
“Photon” mode (P)
This mode rejuvenates the skin and controls the
production of sebum.
• Associated with the sonic vibration
technique that activates stimulation of the
cells, the alternating emission of red and
blue LED light with a defined wave length
will have a multiple effect: the blue LED
light has a soothing effect combatting
acne and can regulate the secretion of
sebum, whereas the red light boosts the
proliferation of collagen, refines fine lines
so that the skin is shinier and more elastic.
“Massage” mode (M)
This mode provides a relaxing, rejuvenating mas-
sage for the skin of the face.
• The association of sonic vibration, use of a
hot compress and the red LED light helps
make the skin more elastic and younger.
“Soothing” mode (S)
This mode relaxes the skin and regulates the pro-
duction of sebum.
• The association of sonic vibration, use
of a hot compress and the blue LED
light helps relax the skin and regu-
late the production of sebum.
Note
• Each mode has 3 levels of intensity. We rec-
ommend using the lowest level of intensity
before gradually increasing it according to
your skin care habits and skin tolerance.
• The device has a smart recognition mode
which means that it only runs when the
electrodes are in contact with the hand and
when the ultrasonic head is touching the skin
of the face. Otherwise, the product stops.
• To switch the device off, hold down
the “On/Off” button. All the lights
will then be switched off.
• It is recommended that the cleansing
mode be carried out every two to three
days. The “nourishing” mode can be used
after a cosmetic solution is applied every
evening, but not for more than 2 to 3
minutes. The other modes can be carried
out after the “nourishing” mode, depending
on your personal bedtime habits, and can
be used every day. It is recommended that
each use should take between 3 and 5
minutes, but should not exceed 8 minutes.
• To make sure the product operates
normally, the product’s electrode must
be touched when using the product.
• The ultrasonic head is waterproof but
the body of the device is not. Please
consult the cleaning instructions in
this manual on how to clean it.
7. CLEANING AND MAINTENANCE
• When you are not using the device,
turn it off and allow it to cool down
for ten minutes or so. Then store it in
a cool, dry place out of direct light.
• After each use, carefully clean the
device with a soft cloth. This can be
slightly damp, if required. Make sure that
the water has not penetrated the inside.
• Do not use detergent or solvent.
You might damage the device.
• Never put the device into water as this
might seep into the device and damage it.
8. TECHNICAL SPECIFICATIONS
Product Name
Pureskin
Product reference
LA131312
Dimensions
16.6 x 5 x 5cm
Weight
± 145 gr
Battery specification
3.7V, 800mAh
Charging time
± 2 hours
E-IM-Pureskin-002.indd 7
E-IM-Pureskin-002.indd 7
11/06/2021 16:37:31
11/06/2021 16:37:31
