Lanaform Pureskin Manual Download Page 6

Page: 6 / 28

Do not use it in places where water is accessible,
such as in a bath or humid environment, in order
to prevent a malfunction or short-circuiting.

You must use the charger that meets the charging

requirements.

You should not be too close to the product during
charging; when you leave for a long period, you

must stop charging the device.

Cut off the power immediately when any anom-
alies occur during charging If the charging cable
is damaged or if the plug is loose, stop charging
immediately.

Use and keep the charging cable correctly. Do not
bend it, stretch it, twist it, press it down or wrap
it around the charger.

How to use the device

Pureskin provides you with 6 completely com-
plementary treatment modes for cleansing the
face and anti-aging facial care: A “cleaning” mode,

“nourishing” mode, “lifting” mode, “soothing”

mode, “massage” mode and “photon” mode.

All these 6 facial treatment modes use different

combinations of technologies, i.e.: the sonic vi-
bration technology (vibration frequency < 20,000
Hertz), massage technology using a hot compress
(>42°C), ion + emission technology; ultrasonic vi-
bration technology (vibration frequency > 20,000
Hertz); electroporation technology; microcur-
rent massage technology (EMS); the emission of
red (wave length 623nm) and blue (wave length

465nm) LED light.

First hold the On/Off button down to switch
Pureskin on. The different treatment modes will
each flash in turn. To select one of the 6 modes
of your choosing, all you have to do is press the

“mode” button until the corresponding LED light

switches on.

Each mode has 3 levels of intensity. To select one
of them, keep pressing the “On/off” button. If you
select intensity 1, the letters “C” and “P” light up, for

intensity 2, the letters “C”, “P”, “N” and “M” light up
and for intensity 3, all the treatment letters light up.

To start the selected treatment, hold the Pureskin

in your hand so that they are in contact with the
two electrodes located on each side of the unit
and the massage head is in contact with your face.

“Cleansing” mode (C)

This mode provides in-depth cleansing of the skin

using a combination of 3 techniques:

• The sonic vibration techniques and use of a

hot compress: These techniques can modify
the cell membrane’s permeability, thus
opening the pores on the skin of the face.

• The ion + emission technique: This technique

emits positive ions for absorbing the
impurities contained in the skin of the face,
providing in-depth cleansing of the skin.
Make sure you use a cosmetic cotton
pad in this mode, taking care to fix it
on properly using the plastic ring.

“Nourishing” mode (N)

This mode provides better penetration of cosmetic

products such as lotions, serums, creams, etc.

1 The sonic vibration techniques and use

of a hot compress mean that cosmet-
ic products can be better absorbed
by opening the skin’s pores.

2 Ultrasonic vibration technique (vibration

frequency > 20,000 Hertz) itself stimulates
the regeneration of the skin’s cells.

3 The electroporation technique that

consists of applying an electrical field
over the cell membranes in order
to increase their permeability.

“Lifting” mode (L)

This mode firms up the skin and redefines the
contours of the face (V-shaped). This mode is par-

ticularly recommended as an evening treatment