Lamtec F300K Series, Manual

Page: 6 / 126

5
1 Important Information about the Manual
1 Important Information about the Manual
1.1 Purpose/Applicability of the Document
This manual enables users to handle the F300K compact flame scanner system safely and
efficiently.
The manual is valid for all F300K systems in any configuration.
The information in this document applies to software version F300K V1.3.0.0 and User Inter-
face V1.4.0.0. If you have a different version of the software, you may find that some of the
functions described are not available or that not all of the available functions are described.
The F300K system complies with the following standards and directives:
• DIN EN 298:2012
• DIN EN 60730-2-5:2015
• DIN EN 50156:2016, Section 10.5
• DIN EN 746-2:2011 (Industrial thermoprocessing equipment – Part 2: Safety requirements
for combustion and fuel handling systems)
• 2014/68/EU (Pressure Equipment Directive)
• 2009/142/EC (Gas Appliances Directive)
• EU/2016/426 Gas Appliance Regulation (GAR)
• 2014/35/EU (Low Voltage Directive)
• 2014/30/EU (EMC Directive)
• DIN EN 61508:2011, parts 1-7 (SIL 3 requirements)
• ISO/IEC 80079-34:2011 Potentially explosive areas - Quality Management System (QAR)
• 2011/65/EU (RoHS2 Directive)
• UL372
1.2 Purpose
In single-burner and multiple-burner furnaces, the flame scanner performs a high-safety mon-
itoring of the burner flame. When the flame goes out, the safe control state’ Flame ’ is reached.
The flame scanner is mainly used in large-scale power plants, thermal power stations and
chemical plants as well as for monitoring furnaces which are operated from.
– oil
– gas
– bio-mass
– dust coal
– chemicals and other waste products