LaMotte SMART Colorimeter, Operator'S Manual

Page: 26 / 52

These alterable sequences allow a series of tests to be set up that are run
frequently. The order of the individual tests in the sequence must be
determined. The SMART Colorimeter will then run through the tests in
order from top to bottom. Once a test is completed the colorimeter is set
to proceed to the
NEXT TEST
in the sequence unless another menu
selection is chosen.
%T/ABS is a fixed sequence of tests which allows the %T and
Absorbance of samples to be read at any of the six wavelengths.
These can be used to determine the range and linearity of a
USER TEST
before entering a new calibration.
ALL TESTS
is a fixed sequence containing the library of all of the tests
including the LaMotte Tests, %T/ABS Tests and User Tests. If all of the
sequences are modified, any test may be accessed by selecting
ALL
TESTS
.
Scrolling to any one of the five testing sequences and selecting one with
the
Q
button will display a menu where the colorimeter can be used to
perform tests.
Pressing the
OFF
button in the
TESTING MENU
turns the colorimeter
off.
GENERAL TESTING PROCEDURES
The following are some step by step examples of how to run tests from the
five testing sequences in the
TESTING MENU
.
TESTING WITH THE LaMOTTE TESTS
Scroll to
ALL TESTS
with the
t
button in the
TESTING MENU .
Push
Q
button to select
ALL TESTS .
TESTING MENU
*ALL TESTS
24 SMART COLORIMETER