Problem
Possible cause
Remedy
The oven does not heat up.
The fuse is blown.
Make sure that the fuse is the
cause of the malfunction. If
the fuse is blown again and
again, contact a qualified
electrician.
The lamp does not operate.
The lamp is defective.
Replace the lamp.
The display shows an error
code that is not in this table.
There is an electrical fault.
• Turn off the oven with the
house fuse or the safety
switch in the fuse box and
turn it on again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Steam and condensation set-
tle on the food and in the cav-
ity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows
"Demo"
.
The demo mode is activated.
Refer to "Basic Settings" in
"Daily use" chapter.
Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
WARNING!
Refer to Safety chapters.
42
