background image

_ 08

User manual LAM1006 / LAM1007

What to do if you smell gas

  Any works on gas equip-

ment and systems may only be 

carried out by authorised 

qualified persons who are Gas 

Safe registered.

  Prior to the installation, 

ensure that local distribution 

conditions (nature of gas and 

gas pressure) and the adjust-

ment of the appliance are 

compatible.

  The appliance is not con-

nected to a combustion prod-

ucts evacuation device. It shall 

be installed and connected 

accordance with current instal-

lation regulations. Particular 

attention shall be given to the 

relevant requirements regard-

ing ventilation.

  The use of gas cooking 

appliance results in the 

production of heat and mois-

ture in the room in which it is 

installed. Ensure that the 

kitchen is well ventilated: keep 

natural ventilation holes open 

or install a mechanical ventila-

tion device (mechanical 

extractor hood). Prolonged 

intensive use of the appliance 

may call for additional ventila-

tion, for example increasing 

the level of mechanical venti-

lation where present.

  Good combustion is 

required in gas appliances. In 

case of incomplete combus-

tion, carbon monoxide (CO) 

might develop.

  Clean the gas burners 

regularly. The flames should 

be blue and burn evenly.

  Carbon monoxide is a 

colourless, odourless and very 

toxic gas, which has a lethal 

effect even in very small 

doses.

  Gas appliances and 

systems must be regularly 

checked for proper function-

ing. Connections, hoses, 

clamps etc should be checked 

regularly. 

  Request information about 

gas emergency telephone 

numbers and safety measures 

in case of gas smell from you 

local gas provider.

  Do not use open flame or 

do not smoke. Do not operate 

any electrical buttons (e.g 

lamp button, door bell etc). Do 

not use mobile phones. Risk of 

explosion and toxication!

  Open the doors and win-

dows.

  Turn off all valves on gas 

appliances and gas meter at 

the main control valve, unless 

its in a confined space or 

cellar.

  Check all tubes and con-

nections for tightness. If you 

still smell gas leave the prop-

erty.

  Warn the neighbours.

  Call the fire brigade. Use a 

telephone outside the house.

  Do not re-enter the proper-

ty until you are told it is safe to 

do so.

Summary of Contents for LAM1006

























Reviews: