background image

_ 07

User manual LAM1006 / LAM1007

  Do not move it as it’s 

likely to be extremely hot.

  Turn off the heat if it’s 

safe to do so, but never lean 

over a pan to reach the 

controls.

  Use fire blanket or a 

damp tea-towel to cover the 

pan. 

  If you have put the fire out, 

leave the pan to cool com-

pletely.

Deep-fat frying presents more 
dangers in your kitchen                    

  Never fill a chip pan (or 

other deep fat fryer) more 

than one-third full of oil.

  Do not use a fire extin-

guisher on a pan of burning oil 

- the force of the extinguisher 

can spread the fire and create 

a fireball.

Safety when working with gas

  Any works on gas equip-

ment and systems may only be 

carried out by authorised 

qualified persons who are Gas 

Safe registered.

  Prior to the installation, 

ensure that local distribution 

conditions (nature of gas and 

gas pressure) and the adjust-

ment of the appliance are 

compatible.

  The appliance is not con-

nected to a combustion prod-

ucts evacuation device. It shall 

be installed and connected 

accordance with current instal-

lation regulations. Particular 

attention shall be given to the 

relevant requirements regard-

ing ventilation.

  The use of gas cooking 

appliance results in the 

production of heat and mois-

ture in the room in which it is 

installed. Ensure that the 

kitchen is well ventilated: keep 

natural ventilation holes open 

or install a mechanical ventila-

tion device (mechanical 

extractor hood). Prolonged 

intensive use of the appliance 

may call for additional ventila-

tion, for example increasing 

the level of mechanical venti-

lation where present.

  Good combustion is 

required in gas appliances. In 

case of incomplete combus-

tion, carbon monoxide (CO) 

might develop.

  Clean the gas burners 

regularly. The flames should 

be blue and burn evenly.

  Carbon monoxide is a 

colourless, odourless and very 

toxic gas, which has a lethal 

effect even in very small 

doses.

  Gas appliances and 

systems must be regularly 

checked for proper function-

ing. Connections, hoses, 

clamps etc should be checked 

regularly. 

  Request information about 

gas emergency telephone 

numbers and safety measures 

in case of gas smell from you 

local gas provider.

Summary of Contents for LAM1006

























Reviews: