13_
LAMONA
Appliances
Protecting the Hob cut-out
The types of chipboard used for work surfaces
swell relatively quickly in contact with humidity.
Apply a special varnish or adhesive to the cut
edges to seal and protect it from moisture ingress.
Positioning
The hob is designed to be built into a worktop as
detailed in the image above.
Aperature width - 490mm x 560mm
The hob may be installed in any worktop which is
heat resistant to a temperature of 100°c, and has
a cut thickness of 25-45mm. The dimensions of the
insert to be cut out of the worktop.
If the hob is fi tted next to a cabinet on either side,
the distance between the hob and cabinet must be
at least 15cm, while the distance between the hob
and the rear wall must be at least 55mm.
When there is an accessible space between the
built in hob and the cavity below, a dividing panel
made of insulating material should be inserted
(wood or a simular material).
560mm
490mm