15_
LAMONA
Appliances
Installation
Installation above an oven
If the appliance is installed with an oven underneath, please leave at least 15mm of ventilation, unless
otherwise stated in your oven installation guidelines.
Installation in the worktop
30mm
Hob
Worktop
Screw
40mm
Hob
Worktop
Screw
20mm
Hob
Worktop
Screw
Secure the hob to the worktop by means of the brackets provided, taking the thickness of the worktop into
account. Your appliance will be supplied and installed using the following installation method.
The two brackets are secured directly into the base of the hob in appropriate positions as shown.
Applying Putty
Apply a thin bead of the putty seal (provided)
to the underside of the hob.
For best results ensure the putty is applied evenly,
as close to the edge as possible and only use
the necessary amount. Once in position, trim any
access putty away with a blunt knife taking care not
the damage the worktop.
Putty Seal
