iXinox 24 C
38
EN
cod. 3541N452EN - Rev. 03 - 03/2020
Exchanger insulation replacement
•Disconnect the power supply and close the gas tap upstream of the valve.
•Remove the cover of the heat exchanger and the burner (see fig. 42).
•Pull out the electrode
“1”
.
•Rotate the insulating disc
“2”
and remove it.
Fan
fig. 43
•Disconnect the power supply and turn off the gas cock ahead of the valve.
•Remove the connector from the fan
•Remove the clamp
“1”
and undo the screws
“2”
.
•Remove the fan electrical connections and then the fan.
1
2
3
1
2
3
