A
SSEMBLY
S
TAGE
#3
Attach Rear Stabilizer & Seat Rail Support to the Main Base
Assembly Hardware Required:
#24 Carriage Bolt
Qty. 2
#31
Truss Head Hex Socket Screw
Qty. 3
#25
Flat Washer
Qty. 3
#32 Curved Washer
Qty. 2
#26
Acorn
Nut
Qty.
2
Assembly Description:
A) Attach the
Rear Stabilizer Assembly
(#5) to the
Seat Rail Support
(#6) using 2-
Carriage Bolts
, 2-
Flat
Washers
(#25), and 2-
Acorn Nuts
(#26). (Reference
Step #7
on the enclosed hardware pack)
B)
Place the
Cap / Cover
(#8) over the end of the
Seat Rail Support
(#6)
and slide the open end of the
Seat
Rail Support
over the lower frame extrusion of the
Main Base
(#). Secure in place using 3-
Truss Head
Hex Socket Screws
(#31), 2-
Curved Washers
(#32), and 1-
Flat Washer
(#25), but do not fully tighten
the hardware until the further assembly of the Seat Rail is completed. (Reference
Step #8
on the enclosed
hardware pack)
Note:
Use the
Adjustment Levelers
(#27) on the
Rear Stabilizer Assembly
(#5) to prevent the base unit
from rocking on an uneven surface. (Reference
Figure #1
)
♦
Assembly Stage #3 completed
A
SSEMBLY
I
NSTRUCTION
P
AGE
7
31
25
31
32
1
6
5
26
25
24
8
A
DJUSTMENT
L
EVELER
USE TOOLS
Figure #1
27
