A
SSEMBLY
STAGE
#2
Attach Front Stabilizer & Pedals to the Main Base
Assembly Hardware Required:
#24
Carriage
Bolt
Qty.
2
#25
Flat
Washer
Qty.
2
#26
Acorn Nut
Qty. 2
Assembly Description:
A) Securely fasten the
Front Stabilizer Assembly
/ with transport wheels (#2) to the
Main Base
(#1)
using
2-
Carriage Bolts
(#24), 2–
Flat Washers
(#25), and 2-
Acorn Nuts
(#26). (Reference
Step #5
on the
enclosed hardware pack)
B) Assemble the
Right Pedal
(#4) to the
Right Crank Arm
on the
Main Base Assembly
(#1). Thread the
pedal on the crank arm and then securely tighten with the pedal wrench. Note: A counterclockwise rotation
will tighten the pedal to the crank arm and a clockwise rotation will loosen the pedal. (*See Note Below)
C) Assemble the
Left Pedal
(#3) to the
Left Crank Arm
on the
Main Base Assembly
(#1). Thread the pedal
onto the crank arm (counterclockwise) and then securely tighten with the pedal wrench. Note: A clockwise
rotation will tighten the pedal to the crank arm and a counterclockwise rotation will loosen the pedal.
(*See Note Below)
D) Attach
Pedal Straps
(included with pedals) to each of the pedals. The straps are labeled (
R)
or (
L
) to
correspond with the right and left pedal.
*Important Assembly Note:
The right and left pedals are appropriately marked (R) and (L). The threading
orientation on the left pedal is reversed from the threading orientation on the right pedal. To avoid stripping
of the threads on the pedals or crank arms make sure to follow the noted assembly orientation.
♦
Assembly Stage #2 completed
A
SSEMBLY
I
NSTRUCTION
P
AGE
6
3
4
1
24
26
25
2
L
R
USE TOOLS
Use This End to Tighten the Pedals
Note: Transport Wheels Face Away From the Main Base
