A
SSEMBLY
S
TAGE
#1
Assemble Seat Pads & Handlebar Assembly to the Seat Frame
Assembly Hardware Required:
(*Hardware may be preinstalled)
#30
Truss Head Hex Socket Screw
Qty. 8
#25 Flat Washers
Qty. 12
#31
Truss Head Hex Socket Screw
Qty. 4
#29 Truss Screw*
Qty. 3
Assembly Description:
A)
Attach the
Handlebar Assembly
(#9) to the
Seat Frame
(#10) using 4-
Truss Head Socket Screws
(#31)
and 4–
Flat Washers
(#25). (Reference
Step #1
on the enclosed hardware pack)
B)
Fasten the Back Pad (#12) to the Seat Frame using 4-
Truss Head Sockets Screws
(#30) and 4-
Flat
Washers
(#25). (Reference
Step #2
on the enclosed hardware pack).
C)
Fasten the
Seat
(#11) to the Seat Frame (#10) using 4-
Truss Head Socket Screws
(#30) and 4-
Flat
Washers
(#25). (Reference
Step #3
on the enclosed hardware pack)
D)
Assemble the
Magazine Rack
(#13) to the back of the
Seat Back
(#12) using *3-
Truss Screws
(#29).
( Note: If assembly hardware is not preinstalled, reference
Step #4
on the enclosed hardware pack).
E)
Thread the
Adjustment Knob
(#23) into the
Seat Frame
(#10). Note: It is not necessary to fully tighten
the knob into the Seat Frame at this point.
♦
Assembly Stage #1 complete
A
SSEMBLY
I
NSTRUCTION
P
AGE
5
11
12
13
31
25
29
25
30
23
9
USE TOOL