36
VOR DER ERSTEN INGEBRAUCHNAHME DES
SUPPENMIXERS MIT TOUCHSCREEN
•
WARNHINWEISE:
Stecken Sie den Netzstecker nicht in die Netzsteckdose und nehmen
Sie den Suppenmixer nicht in Betrieb, bevor Sie ihn vollständig montiert haben.
• Packen Sie den Suppenmixer aus und entfernen Sie sämtliche Verpackungsmaterialien.
• Wischen Sie den Gehäusesockel und den Behälter von außen vor dem ersten Gebrauch
mit einem sauberen feuchten Tuch ab.
VERWENDUNG DER SELBSTREINIGUNGSEINSTELLUNG
Der Behälter ist eine vollständige Einheit bestehend aus Klingen, Heizplatte, Behälter und
Griff. Versuchen Sie nicht, den Behälter von der Heizplatte zu entfernen. Der Behälter
darf nicht in Wasser getaucht werden. Verwenden Sie die Einstellung
AUTO CLEAN
(Selbstreinigung), um das Innere des Behälters sowie unter den Klingen zu säubern.
• Stellen Sie den Sockel auf eine ebene, trockene und hitzebeständige Fläche in der Nähe
einer Steckdose.
• Füllen Sie den Behälter mit 1000 ml Wasser und 3 bis 4 Tropfen Spülmittel auf.
• HINWEIS: Wenn der Behälter voll aufgefüllt ist, wird er sehr
schwer. Heben Sie den Behälter mit beiden Händen auf den
Sockel. Die Einkerbung auf der Behälterrückseite passt in die
Kerbe am Sockel.
• Positionieren Sie den Deckel und lassen Sie den Messbecher mit einem hörbaren “Klick”
einrasten. Der Suppenmixer funktioniert nicht, bis der Deckel richtig eingerastet ist. Dies
ist eine Sicherheitsfunktion.
• Stecken Sie den Stecker in die Steckdose und
schalten Sie das Gerät am Sockel ein. Die
Taste
EIN/AUS
leuchtet auf. Drücken
Sie die
EIN/AUS-Taste
, um das Gerät
einzuschalten und das Display zu erleuchten.
Drücken Sie die Taste
AUTO CLEAN
(Selbstreinigung) - darunter erscheint nun
eine Linie und die Taste
START/STOP
blinkt.
• Der Timer zeigt 5 Minuten an, was dem Reinigungszyklus entspricht.
• Drücken Sie die Taste
START/STOP,
um mit der Reinigung des Behälters zu beginnen.
Der Suppenmixer piept jedes Mal dreimal, wenn die Klingen im Laufe des gesamten
Zyklus pürieren.
Einkerbung
Kerbe